I usually put weight on the strip to hold it in place while the adhesive cures overnight if possible.
Folded carpet edge.
Turn the carpet facedown and place a metal straight edge along the edge of the carpet to be folded.
Grab the edge of the carpet and push it over onto the tack strip.
Press the folded carpet piece over the tacking strips.
After making the fold i sharpen the crease by going over it with a hammer.
Then it s just a matter of applying construction adhesive to the strip and pressing it into place overlapping the edges of both the tile and the carpet.
The idea is to weaken the bottom binding.
Once you have the cloth stapled onto the carpet fold the cloth around the edge over the staples.
Before folding the carpet i apply a bead of construction adhesive to the under side of the flap so that the carpet will adhere to itself.
Hold the straight edge firmly in place.
Leave 1 inches of the carpet showing between the straight edge and the edge of the carpet.
Do not cut through the bottom.
Flip the carpet over so the back is facing up with the cloth kind of fanning out along the edge.
You only want to create a.
Step 4 hold the straight edge firmly in place.
Continue to pull the outside edge of the carpet until the fold lies just past the carpet side.
You will need to use your utility knife to cut the edge of the excess carpet off.
Standing on the carpet near the join pull the edge towards you so the carpet folds over on itself.
Score the bottom of the carpet with an awl along the straight edge.
Put a bead of latex or glue along the edge just a little bit till you get the hang of what you re doing then you can advance to maybe doing a foot at a time.
If the straight edge is wide and long enough kneel on it with one knee to hold it down.
The tack strip should come up through the carpet and hold it into place.
Turn the carpet face down and place a metal straight edge along the edge of the carpet to be folded.
If the straight edge is wide and long enough kneel on it with one knee to hold it down.